Magnetic Fe 3 O 4 assembled on nZVI supported on activated carbon fiber for Cr(VI) and Cu(II) removal from aqueous solution through a permeable reactive column

Abstract

Magnetic Fe₃O₄ assembled on nanoscale zero-valent iron (nZVI) supported on an activated carbon fiber (ACF) to form nanoscale magnetic composites (nZVI-Fe₃O₄/ACF) for removing Cr(VI) and Cu(II) from aqueous solution through a permeable reactive column was synthesized via an in situ reduction method. The nZVI-Fe₃O₄/ACF composites and the interaction between nZVI-Fe₃O₄/ACF and both Cr and Cu ions were characterized by field emission scanning electron microscopy (FESEM) with EDX, TEM, XRD, and XPS. Batch experiments were used to analyze the effects of main factors on Cr(VI) removal and investigate the simultaneous removal of Cr(VI) and Cu(II) through a permeable reactive column. The results indicated that the ACF and Fe₃O₄ can inhibit the agglomeration and enhance the dispersibility of nZVI, and Fe₃O₄ and nZVI displayed good synergetic effects. The removal efficiency of Cr(VI) improved with the increase amount of Fe₃O₄ in the nZVI-Fe₃O₄/ACF composites. With low initial concentration of Cr(VI) and acidic conditions, ~ 90% of 20.0 mg·L⁻¹ Cr(VI) in the solution was removed after 60 min. The removal of Cr(VI) was also affected by coexisting ions. The removal efficiency of 10.0 mg·L⁻¹ Cu(II) was ~ 100% after 45 min of reaction, and the presence of Cu(II) can accelerate the reduction of Cr(VI). The simultaneous removal mechanisms of Cr(VI) and Cu(II) by the nZVI-Fe₃O₄/ACF composites also were proposed.

from Energy Ecology Environment Ambio via Terpsi Hori on Inoreader http://bit.ly/2Qhk7Id