Elucidating the dechlorination mechanism of hexachloroethane by Pd-doped zerovalent iron microparticles in dissolved lactic acid polymers using chromatography and indirect monitoring of iron corrosion

Abstract

The degradation mechanism of the pollutant hexachloroethane (HCA) by a suspension of Pd-doped zerovalent iron microparticles (Pd-mZVI) in dissolved lactic acid polymers and oligomers (referred to as PLA) was investigated using gas chromatography and the indirect monitoring of iron corrosion by continuous measurements of pH, oxidation-reduction potential (ORP), and conductivity. The first experiments took place in the absence of HCA, to understand the evolution of the Pd-mZVI/PLA/H₂O system. This showed that the evolution of pH, ORP, and conductivity is related to changes in solution chemistry due to iron corrosion and that the system is initially cathodically controlled by H⁺ mass transport to Pd surfaces because of the presence of an extensive PLA layer. We then investigated the effects of Pd-mZVI particles, temperature, initial HCA concentration, and PLA content on the Pd-mZVI/PLA/HCA/H₂O system, to obtain a better understanding of the degradation mechanism. In all cases, HCA dechlorination first requires the production of atomic hydrogen H^*—involving the accumulation of tetrachloroethylene (PCE) as an intermediate—before its subsequent reduction to non-chlorinated C₂ and C₄ compounds. The ratio between Pd-mZVI dosage, initial HCA concentration, and PLA content affects the rate of H^* generation as well as the rate-determining step of the process. A pseudo-first-order equation can be applied when Pd-mZVI dosage is much higher than the theoretical stoichiometry (600 mg for [HCA]₀ = 5–20 mg L⁻¹). Our results indicate that the HCA degradation mechanism includes mass transfer, sorption, surface reaction with H^*, and desorption of the product.

from Energy Ecology Environment Ambio via Terpsi Hori on Inoreader http://bit.ly/2VY2JMF