Removal of Fluoride from Water by Adsorption onto Fired Clay Pots: Kinetics and Equilibrium Studies

Excessive fluoride in potable water is a serious health problem in rural areas of many developing countries. Hence, there is a need to find a simple and cost-effective method for water defluoridation in such areas. In the northern part of Cameroon, clay pots are used for cooking food and water storage. The firing of these pots consists of intensive burning using fire wood. They were tested as a potential adsorbent for removing excess fluoride from water. Experiments were carried out in a jar test at room temperature (25 ± 2°C). Effects of contact time (0–90 min), pH (4, 5, 7, 8, and 9), stirring speed (60, 90, 120, and 200 rpm), and ionic strength (0–1000 mg/L) were investigated. Results showed that equilibrium was attained in 10 min whatever the pH. Pseudo-second-order and pore diffusion models described well the adsorption process. The highest amount of fluoride adsorbed (1.6 mg/g) was obtained at pH 4-5 and the optimum stirring speed is 120 rpm. Ionic strength has a significant effect on fluoride adsorption.

from # All Medicine by Alexandros G. Sfakianakis via Alexandros G.Sfakianakis on Inoreader http://ift.tt/2sASOS6
via IFTTT